مزایای دوزینگ پمپ هایدرو پرومیننت

  • سنسور پارگی دیافراگم
  • رلیف ولو داخلی
  • عملکردی دیافراگم بصورت هیدرولیکی
  • در دو جنس هد PVDF و استیل 316
  • نشانگر ارتفاع روغن
دوزینگ پمپ هایدرو پرومیننت اسکچ

دوزینگ پمپ هایدرو پرومیننت اسکچ

دوزینگ پمپ هیدرولیکی هایدرو پرومیننت Hydro ProMinent

این پمپ از انواع پمپ های هیدرولیکی دیافراگمی است. ساختار و طراحی پمپ به گونه ایست که روغن هیدرولیک و روغن جعبه دنده از یک جنس بوده و انتقال قدرت موتور از طریق جعبه دنده و سپس بخش هیدرولیک به دیافراگم است.
دیافراگم این پمپ از جنس تفلون چند لایه و مجهز به سنسور پارگی بوده و با ساختاری ساده تا فشار 100 bar قابل بهره برداری می باشد.

این پمپ در سه مدل زیر ارائه می شود:
Hydro 2 تا فشار 100 bar و تا ظرفیت 68 l/h
hydro 3 تا فشار 100 bar و تا ظرفیت 170 l/h
Hydro 4 تا فشار 25 bar و تا ظرفیت 1400 l/h

ProMinent Hydro/2

Technical Details

Stroke length: 15 mm, Rod force: 2,000 N

Stroke volume adjustment range: 0 – 100%

Stroke volume adjustment: manually by scaled rotary dial (optionally with electric actuator or control drive)

Metering reproducibility is better than ± 1% in the 20 to 100% stroke volume range under defined conditions and with correct installation

PTFE multi-layer diaphragm with electric diaphragm rupture warning system via a contact

Integrated hydraulic relief and bleed valve

Wetted materials: PVDF, PTFE+25% carbon, stainless steel 1.4571, Hastelloy C.

A wide range of power end versions is available: Three-phase or 1-phase AC motor, motors for use in areas at risk from explosion, different flange designs for use of customer-specific motors

Degree of protection: IP 55

Design in compliance with API 675 among others

Type HP2a With 1500 rpm motor at 50 Hz With 1800 rpm motor at 60 Hz Suction lift Perm. pre-pressure suction side Connection on suction/pressure side Shipping weight Plunger Ø
Delivery rate at max. back pressure Max. stroke rate Delivery rate at max. back pressure Max. stroke rate
bar l/h ml/stroke Strokes/min psi l/h/gph (US) Strokes/min m WC bar G-DN kg mm
100003* 100 3 0.8 60 1,450 3.6/1.0 72 3.0 5 Rp 1/4* 31 16
100006* 100 6 0.8 125 1,450 7.0/1.8 150 3.0 5 Rp 1/4* 31 16
100007* 100 7 0.8 150 1,450 8.0/2.1 180 3.0 5 Rp 1/4* 31 16
100009* 100 9 0.8 187 1,450 11.0/2.9 224 3.0 5 Rp 1/4* 31 16
100010* 100 10 0.8 212 3.0 5 Rp 1/4* 31 16
064007 64 7 2.0 60 928 8.4/2.2 72 3.0 5 G 3/4-10 31 18
064015 64 15 2.0 125 928 18.0/4.8 150 3.0 5 G 3/4-10 31 18
064018 64 18 2.0 150 928 21.0/5.5 180 3.0 5 G 3/4-10 31 18
064022 64 22 2.0 187 928 26.0/6.9 224 3.0 5 G 3/4-10 31 18
064025 64 25 2.0 212 3.0 5 G 3/4-10 31 18
025019 25 19 5.3 60 362 23.0/6.1 72 3.0 5 G 3/4-10** 31 26
025040 25 40 5.3 125 362 48.0/12.7 150 3.0 5 G 3/4-10** 31 26
025048 25 48 5.3 150 362 58.0/15.3 180 3.0 5 G 3/4-10** 31 26
025060 25 60 5.3 187 362 72.0/19.0 224 3.0 5 G 3/4-10** 31 26
025068 25 68 5.3 212 3.0 5 G 3/4-10** 31 26
Version PVDF max. 25 bar.
* Version SST/HCT with double ball valve, valve connector on the suction-pressure with female thread Rp 1/4 and external thread G 3/4 – DN 10
** HV design with G1 – DN 15 connector

Materials in Contact With the Medium

Material Dosing head Suction/pressure connector Seals/ball seat Balls
SST Stainless steel 1.4571/1.4404 Stainless steel 1.4581 PTFE/ZrO2 (DN 15 – stainless steel 1.4404) Ceramic
PVT* PVDF (polyvinylidene fluoride) PVDF (polyvinylidene fluoride) PTFE/PTFE Ceramic
HCT Hastelloy C Hastelloy C PTFE/Hastelloy C Ceramic
TTT PTFE + 25 % carbon PVDF (polyvinylidene fluoride) PTFE/PTFE Ceramic

* not for areas at risk from explosion

Motor Data

Identity code specification Power supply Remarks
S 3-phase, IP 55 220 – 240 V/380 – 420 V
250 – 280 V/440 – 480 V
50 Hz
60 Hz
0.37 kW
T 3-phase, IP 55 220 – 240 V/380 – 420 V
265 – 280 V/440 – 480 V
50 Hz
60 Hz
0.37 kW with PTC, speed control range 1:5
R 3-phase, IP 55 230 V/400 V 50/60 Hz 0.37 kW with PTC, speed adjustment range 1:20 with external fan 1-phase 230 V; 50/60 Hz
V0 1-phase, IP 55 230 V ±10% 50/60 Hz 0.37 kW Variable speed motor with integrated frequency converter
L1 3-phase,
II 2G Ex h IIC T3 Gb X
220 – 240 V/380 – 420 V 50 Hz 0.37 kW
L2 3-phase,
II 2G Ex h IIC T4 Gb X
220 – 240 V/380 – 420 V 50 Hz 0.37 kW with PTC, speed control range 1:5
P1 3-phase,
II 2G Ex h IIC T3 Gb X
254 – 277 V/440 – 480 V 60 Hz 0.37 kW
P2 3-phase,
II 2G Ex h IIC T4 Gb X
254 – 277 V/440 – 480 V 60 Hz 0.37 kW with PTC, speed control range 1:5
V2 3-phase,
II 2G Ex h IIC T4 Gb X
400 V ±10% 50/60 Hz 0.55 kW Ex-variable speed motor with integrated frequency converter

Motor data sheets can be requested for more information. Motors for Sigma basic pumps, special motors or special motor flanges are available on request.

The motors are designed in compliance with the Ecodesign Directive 2009/125/EC.

Information for use in areas at risk from explosion

Only use pumps with the appropriate labelling in line with the ATEX Directive 2014/34/EU in premises at risk from explosion. Ensure that the explosion group, category and degree of protection specified on the label corresponds to or is better than the conditions prevalent in the intended field of application.

ProMinent Hydro/3

Technical Details

Stroke length: 15 mm, Rod force: 4,200 N

Stroke volume adjustment range: 0 – 100%

Stroke volume adjustment: manually by scaled rotary dial (optionally with electric actuator or control drive)

Metering reproducibility is better than ± 1% in the 20 – 100% stroke volume range under defined conditions and with correct installation

PTFE multi-layer diaphragm with electrical diaphragm rupture warning system via a contact

Integrated hydraulic relief and bleed valve

Wetted materials: PVDF, PTFE+25% carbon, stainless steel 1.4571, Hastelloy C.

A wide range of power end versions is available: Three-phase or 1-phase AC motor, motors for use in areas at risk from explosion, different flange designs for use of customer-specific motors

Degree of protection: IP 55

Design in compliance with API 675 among others

Type HP3a With 1500 rpm motor at 50 Hz With 1800 rpm motor at 60 Hz Suction lift Perm. pre-pressure suction side Connection suction/discharge side Shipping weight Plunger Ø
Delivery rate at max. back pressure Max. stroke rate Delivery rate at max. back pressure Max. stroke rate
bar l/h ml/stroke Strokes/min psi l/h/gph (US) Strokes/min m WC bar G–DN kg mm
100010* 100 10 2.8 60 1,450 12/3.2 72 3.0 5 Rp 3/8–10* 41 22
100021* 100 21 2.8 125 1,450 25/6.6 150 3.0 5 Rp 3/8–10* 41 22
100025* 100 25 2.8 150 1,450 30/7.9 180 3.0 5 Rp 3/8–10* 41 22
100031* 100 31 2.8 187 1,450 37/9.8 224 3.0 5 Rp 3/8–10* 41 22
100035* 100 35 2.8 212 1,450 3.0 5 Rp 3/8–10* 41 22
064019 64 19 5.3 60 928 23/6.1 72 3.0 5 G 3/4–10** 41 26
064040 64 40 5.3 125 928 48/12.7 150 3.0 5 G 3/4–10** 41 26
064048 64 48 5.3 150 928 58/15.3 180 3.0 5 G 3/4–10** 41 26
064060 64 60 5.3 187 928 72/19.0 224 3.0 5 G 3/4–10** 41 26
064068 64 68 5.3 212 928 3.0 5 G 3/4–10** 41 26
025048 25 48 13.4 60 362 58/15.3 72 3.0 5 G 1–15*** 41 38
025100 25 100 13.4 125 362 120/31.7 150 3.0 5 G 1–15*** 41 38
025120 25 120 13.4 150 362 144/38.0 180 3.0 5 G 1–15*** 41 38
025150 25 150 13.4 187 362 180/47.6 224 3.0 5 G 1–15*** 41 38
025170 25 170 13.4 212 362 3.0 5 G 1–15*** 41 38
Version PVDF max. 25 bar.
* Version SST/HCT with double ball valve, valve connector on the suction/discharge side with female thread Rp 3/8 and external thread G 3/4 – DN 10
** HV design (SST only) with G 1 – DN 15 connector
*** HV design (SST only) with 1 1/4“ DN 20 connector

Materials in Contact With the Medium

Material Dosing head Suction/pressure connector Seals/ball seat Balls
SST Stainless steel 1.4571/1.4404 Stainless steel 1.4581 PTFE/stainless steel 1.4404 Ceramic
PVT* PVDF (polyvinylidene fluoride) PVDF (polyvinylidene fluoride) PTFE/PTFE Ceramic
HCT Hastelloy C Hastelloy C PTFE/Hastelloy C Ceramic
TTT PTFE + 25 % carbon PVDF (polyvinylidene fluoride) PTFE/PTFE Ceramic

* not for areas at risk from explosion

Motor Data

Identity code specification Power supply Remarks
S 3-phase, IP 55 220 – 240 V/380 – 420 V
250 – 280 V/440 – 480 V
50 Hz
60 Hz
0.75 kW
T 3-phase, IP 55 220 – 240 V/380 – 420 V
265 – 280 V/440 – 480 V
50 Hz
60 Hz
0.75 kW with PTC, speed control range 1:5
R 3-phase, IP 55 230 V/400 V 50/60 Hz 0.75 kW with PTC, speed control range 1:20, with external fan 1-phase 230 V; 50/60 Hz
V0 1-phase, IP 55 230 V ±10% 50/60 Hz 0.75 kW Variable speed motor with integrated frequency converter
L1 3-phase,
II 2G Ex h IIC T3 Gb X
220 – 240 V/380 – 420 V 50 Hz 0.75 kW
L2 3-phase,
II 2G Ex h IIC T4 Gb X
220 – 240 V/380 – 420 V 50 Hz 0.75 kW with PTC, speed control range 1:5
P1 3-phase,
II 2G Ex h IIC T3 Gb X
254 – 277 V/440 – 480 V 60 Hz 0.75 kW
P2 3-phase,
II 2G Ex h IIC T4 Gb X
254 – 277 V/440 – 480 V 60 Hz 0.75 kW with PTC, speed control range 1:5
V2 3-phase,
II 2G Ex h IIC T4 Gb X
400 V ±10% 50/60 Hz 0.75 kW Ex-variable speed motor with integrated frequency converter

Motor data sheets can be requested for more information. Motors for Sigma basic pumps, special motors or special motor flanges are available on request.

The motors are designed in compliance with the Ecodesign Directive 2009/125/EC.

Information for use in areas at risk from explosion

Only use pumps with the appropriate labelling in line with the ATEX Directive 2014/34/EU in premises at risk from explosion. Ensure that the explosion group, category and degree of protection specified on the label corresponds to or is better than the conditions prevalent in the intended field of application.

ProMinent Hydro/4

Technical Details

Stroke length: 20 mm, Rod force: 5,800 N

Stroke volume adjustment range: 0 – 100%

Stroke volume adjustment: manually by scaled rotary dial (optionally with electric actuator or control drive).

Metering reproducibility is better than ± 1% in the 20 – 100% stroke volume range under defined conditions and with correct installation

PTFE multi-layer diaphragm with electrical diaphragm rupture warning system via a contact

Integrated hydraulic relief and bleed valve

Wetted materials: PVDF, PTFE+25% carbon, stainless steel 1.4571, Hastelloy C.

A wide range of power end versions is available: Three-phase or 1-phase AC motor, motors for use in areas at risk from explosion, different flange designs for use of customer-specific motors

Degree of protection: IP 55

Design in compliance with API 675 among others

Type HP4a With 1500 rpm motor at 50 Hz With 1800 rpm motor at 60 Hz Suction lift Perm. pre-pressure suction side Connection suction/discharge side Shipping weight Plunger Ø
Delivery rate at max. back pressure Max. stroke rate Delivery rate at max. back pressure Max. stroke rate
bar l/h ml/stroke Strokes/min psi l/h/gph (US) Strokes/min m WC bar G–DN kg mm
400075 40 76 17.7 71 580 91/24 86 3 1 G 1 1/2–25 69 40
400109 40 109 17.7 103 580 132/35 124 3 1 G 1 1/2–25 69 40
400145 40 145 17.7 136 580 174/46 164 3 1 G 1 1/2–25 69 40
400200 40 200 17.7 188 580 239/63 225 3 1 G 1 1/2–25 69 40
400227 40 227 17.7 214 3 1 G 1 1/2–25 69 40
250130 25 130 31.0 71 363 155/41 86 3 1 G 1 1/2–25 69 52
250190 25 190 31.0 103 363 230/61 124 3 1 G 1 1/2–25 69 52
250250 25 250 31.0 136 363 300/79 164 3 1 G 1 1/2–25 69 52
250350 25 350 31.0 188 363 420/111 225 3 1 G 1 1/2–25 69 52
250400 25 400 31.0 214 3 1 G 1 1/2–25 69 52
160210 16 210 48.7 71 232 250/66 86 3 1 G 1 1/2–25 76 63
160300 16 300 48.7 103 232 360/95 124 3 1 G 1 1/2–25 76 63
160400 16 400 48.7 136 232 480/127 164 3 1 G 1 1/2–25 76 63
160550 16 550 48.7 188 232 660/174 225 3 1 G 1 1/2–25 76 63
160625 16 625 48.7 214 3 1 G 1 1/2–25 76 63
100330 10 330 78.0 71 145 400/106 86 3 1 G 2–32 87 80
100480 10 480 78.0 103 145 580/153 124 3 1 G 2–32 87 80
100635 10 635 78.0 136 145 760/201 164 3 1 G 2–32 87 80
100880 10 880 78.0 188 145 1,050/277 225 3 1 G 2–32 87 80
101000 10 1,000 78.0 214 3 1 G 2–32 87 80
070465 7 465 109.0 71 102 560/148 86 3 1 G 2 1/4–40 96 94
070670 7 670 109.0 103 102 805/213 124 3 1 G 2 1/4–40 96 94
070890 7 890 109.0 136 102 1,070/283 164 3 1 G 2 1/4–40 96 94
071230 7 1,230 109.0 188 102 1,450/383 225 3 1 G 2 1/4–40 96 94
071400 7 1,400 109.0 214 3 1 G 2 1/4–40 96 94

Materials in Contact With the Medium

DN 25 ball valves DN 32/DN 40 plate valves
Material Dosing head Suction/pressure connector Seals Valve balls Valve seats Seals Valve plates/valve springs Valve seats
SST Stainless steel 1.4404 Stainless steel 1.4404 PTFE Stainless steel 1.4404 PTFE PTFE Stainless steel 1.4404/ Hast. C PTFE
PVT* PVDF (polyvinylidene fluoride) PVDF (polyvinylidene fluoride) PTFE Glass PTFE PTFE Ceramic/E-CTFE PTFE
HCT Hastelloy C Hastelloy C PTFE Hastelloy C PTFE PTFE Hast. C / E-CTFE PTFE
TTT PTFE + 25 % carbon PVDF (polyvinylidene fluoride) PTFE Glass PTFE PTFE Ceramic/E-CTFE PTFE

* not for areas at risk from explosion

Motor Data

Identity code specification Power supply Remarks
S 3-phase, IP 55 220 – 240 V/380 – 420 V
250 – 280 V/440 – 480 V
50 Hz
60 Hz
1.1 kW
T 3-phase, IP 55 220 – 240 V/380 – 420 V
265 – 280 V/440 – 480 V
50 Hz
60 Hz
1.1 kW with PTC, speed control range 1:5
R 3-phase, IP 55 230 V/400 V 50/60 Hz 1.5 kW with PTC, speed control range 1:20, with external fan 1-phase 230 V; 50/60 Hz
V0 3-phase, IP 55 400 V 50/60 Hz 1.5 kW Variable speed motor with integrated frequency converter
L1 3-phase,
II 2G Ex h IIC T3 Gb X
220 – 240 V/380 – 420 V 50 Hz 1.1 kW
L2 3-phase,
II 2G Ex h IIC T4 Gb X
220 – 240 V/380 – 420 V 50 Hz 1.1 kW with PTC, speed control range 1:5
P1 3-phase,
II 2G Ex h IIC T3 Gb X
254 – 277 V/440 – 480 V 60 Hz 1.1 kW
P2 3-phase,
II 2G Ex h IIC T4 Gb X
254 – 277 V/440 – 480 V 60 Hz 1.1 kW with PTC, speed control range 1:5
V2 3-phase,
II 2G Ex h IIC T4 Gb X
400 V ±10% 50/60 Hz 1.5 kW Ex-variable speed motor with integrated frequency converter

Motor data sheets can be requested for more information. Motors for Sigma basic pumps, special motors or special motor flanges are available on request.

The motors are designed in compliance with the Ecodesign Directive 2009/125/EC.

Information for use in areas at risk from explosion

Only use pumps with the appropriate labelling in line with the ATEX Directive 2014/34/EU in premises at risk from explosion. Ensure that the explosion group, category and degree of protection specified on the label corresponds to or is better than the conditions prevalent in the intended field of application.

دیدگاه بگذارید